Share some CCNP Collaboration 300-080 exam questions and answers below.
Which three network conditions and equipment should you avoid to ensure a high-quality Cisco TelePresence experience? (Choose three.)
A. network hubs
B. Layer 3 switches
C. duplex mismatch connections
D. 10/100 access ports
E. high utilization link with QoS
F. network loops
G. redundant network trunks
Answer: A,C,F
A user using a CP-9971 SIP phone reports that during a video call, the video portion of the call freezes. What should you do in order to point to and troubleshoot the issue?
A. Restart the phone.
B. On the phone, navigate to Administrator Settings > Status > Call Statistics > Video > Video statistics > Rcvr Packets statistics. Verify if the phone is receiving packets.
C. Make sure that the camera is connected to the USB.
D. Verify if the camera shutter is open.
E. Perform a factory reset of the phone.
Answer: B
After an IP Phone gets IP address information from DHCP, what is the next step in the initialization process?
A. CTL and ITL files are downloaded.
B. The phone requests its VLAN information.
C. The DHCP offer is sent from the phone
D. The TFTP server is contacted for configuration information.
E. Nothing else is required, the phone is operational at this stage
Answer: D
When identifying Cisco TelePresence Endpoint traffic characteristics, which three statements are true? (Choose three.)
A. Latency, jitter, and loss are measured in a round-trip fashion.
B. Latency, jitter, and loss are measured unidirectionally.
C. Latency and loss are measured at a packet level, based on RTP header sequence numbers and time stamps.
D. Latency and jitter are measured at a packet level, based on RTP header sequence numbers and time stamps.
E. Jitter is measured at a video frame level, by measuring the arrival time of the video frame versus the expected arrival time.
F. Jitter is measured at a packet level, by measuring the arrival time of the packet versus the expected arrival time.
Answer: B,C,E
Where in Cisco TMS would you see if a system is registered to a Cisco VCS or a Cisco Unified Communications Manager?
A. Systems > Registration
B. Navigation > Systems > Registrations
C. under Registration on the System Administration tab
D. System Overview
E. Settings > Provisioning
F. where you start the Cisco Unified Communications Manager RTMT under Systems and Reports
Answer: D
In order to pass Cisco certification 300-080 exam disposably, you must have a good preparation and a complete knowledge structure. Passtcert can provide you the resources to meet your need.Passtcert is a website which always provide you the latest and most accurate Cisco 300-080 certification test guides. In order to allow you to safely choose us, you can free download part of the Cisco 300-080 certification test guides on Passtcert website as a free try. Passtcert can ensure you 100% pass CCNP Collaboration certification 300-080 exam.If you are still hesitate to choose our Passtcert, you can try to free download part of Cisco 300-080 certification test guides provided in our Passtcert.
No comments:
Post a Comment